Individual friction linings for braking, clutching and sliding
Made in Germany | since 1995
Direct consulting
+49 2486 95060
Development
Technical data sheets
PZ Friction carries over 50 premium qualities. As a German manufacturer of friction linings in the high-performance sector, we process only high-quality raw materials. We produce brake linings, clutch facings and sliding linings in cooperation with our customers - application-specific from prototype to series. Together with engineers, technical buyers and industry experts, we develop the desired premium quality with an optimal cost-benefit ratio where standard products reach their limits.
Here you will find a small excerpt of our friction linings. In addition, we have specific products in our range and always have the possibility to develop new qualities for your requirements.
We will be pleased to provide you with a non-binding user consultation.
PZ 6005
Material Description:
PZ 6005 is a metal-containing friction material bonded by resin and synthetic rubber, suitable for oil running and resistant to seawater.
Fields of application:
PZ 6005 is a versatile grade with a high coefficient of friction, e.g. for brakes, clutches and in general mechanical engineering.
Delivery form:
Molded parts, e.g. rings
PZ 6011
Material Description:
PZ 6011 is a metal-free, resin-bonded friction material suitable for oil running and resistant to seawater.
Fields of application:
PZ 6011 is a grade that can be used in a variety of applications, such as brakes and clutches in general engineering.
Delivery form:
Molded parts, e.g. plates
PZ 7016
corresponds to Jurid 421
Material Description:
PZ 7016 is a metal-containing friction material bonded by resin and synthetic rubber. It is characterized by a high, stable friction coefficient level and high strength. The material is oil resistant to a limited extent.
Fields of application:
PZ 7016 is suitable for industrial brakes with high dynamic friction value requirements (e.g. cranes).
Delivery form:
Rolled strip and compression molded parts, e.g. drum brake linings
PZ 7021
corresponds to Jurid 533
Material Description:
PZ 7021 is a metal-free, resin-bonded friction material. It is characterized by a stable friction coefficient level and high strength, as well as good wear behavior. The material is oil resistant.
Fields of application:
PZ 7021 is suitable for industrial brakes for industrial brakes and clutches with medium friction value requirements, e.g. in agricultural machinery, wind turbines.
Delivery form:
Plates and molded parts
PZ 7026
corresponds to Jurid 565
Material Description:
PZ 7026 is a metal-containing friction material bonded by resin and rubber. The material is characterized by stable friction behavior, low noise and good wear behavior.
Fields of application:
PZ 7026 is a drum brake lining especially for trucks and buses.
Delivery form:
Drum brake pads
PZ 7030
corresponds to Jurid 850
Material Description:
PZ 7030 is a metal-free friction material bonded by rubber and resin. It is flexible, easily bondable and oil-resistant.
Fields of application:
PZ 7030 is particularly suitable for couplings in garden tools.
Delivery form:
Roll goods, sheets and molded parts
PZ 8010
Material Description:
PZ 8010 is a metal-free friction material bonded by synthetic resin. It stands out for its low, very stable friction coefficient level and good wear resistance. The material is also characterized by very high hardness as well as compressive strength and is oil resistant.
Fields of application:
PZ 8010 is suitable for sliding plates in rail vehicles and commercial vehicles, e.g. as wear protection.
Delivery form:
Molded parts
PZ 8013
Material Description:
PZ 8013 is a metal-free and resin-bonded sliding material.
Fields of application:
PZ 8013 is suitable for use as sliding material (sliding rails).
Delivery form:
Molded parts
PZ 8128
Material Description:
PZ 8128 is a rubber-bonded, flexible, easily bondable and oil-resistant friction material without metal components.
Fields of application:
PZ 8128 is suitable for general industrial applications with medium friction value requirements with good temperature stability and for drum brakes.
Delivery form:
Roll goods, sheets and molded parts
PZ 8429
Material Description:
PZ 8429 is a metal-free friction material bonded by resin and synthetic rubber. It is characterized by good friction value stability and a high static friction value.
Fields of application:
PZ 8429 is suitable for industrial brakes with high friction value requirements (static and dynamic)
Delivery form:
Molded parts, plates and drum brake linings
PZ 8610
Material Description:
PZ 8610 is a metal-free, resin-bonded and oil-resistant friction material.
Fields of application:
PZ 8610 is a quality that can be used in a variety of applications, such as brakes and (slip) clutches in general engineering.
Delivery form:
Molded parts, e.g. plates
PZ 8728
Material Description:
PZ 8728 is a rubber-bonded, flexible, readily bondable and oil-resistant friction material.
Fields of application:
PZ 8728 is suitable for general industrial applications with higher friction value requirements and for industrial drum brakes.
Delivery form:
Roll goods, sheets and molded parts
Your contact
Jürgen Houbé
Development / Application engineering
+49 2486 9506-0
Request
Can't be done, doesn't exist!
Our creative professionals will find the perfect approach for any application.